Timers
Functions → Timers
Timers produce a time value (seconds) on an output channel with configurable start, stop, and reset logic.
Example: hide the camera view 10 seconds after reverse gear is deselected.
Settings
Output Channel
Channel that holds the running time in seconds.
On Expired Event
Event triggered when the timer reaches Max Time.
Max Time
Maximum time in seconds. 0 = no time limit.
Reset Mode
| Mode | Behaviour |
|---|---|
| Never | Timer never auto-resets |
| On Timer Start | Time resets to 0 when the timer starts |
| On Timer Stop | Time resets to 0 when the timer stops |
| On Condition | Time resets to 0 when the Reset Condition is true |
Start Condition
When the start condition is true and the stop condition is false, the timer runs. The stop condition takes precedence.
Stop Condition
When true, the timer stops. If no stop conditions are set, the result is always false (does not force a stop by itself).
Reset Condition
When true, the timer resets to 0. Only used when Reset Mode is On Condition. If no reset conditions are set, the result is always false.