https://docs.emtronaustralia.com.au/engine-management/config/air-mass/bank-speed-density/index.htmlThe ECU Independently controls the Fueling for the Engines Banks 1 and 2 using two MAP Sensors . Required when there is no common plenum between the cylinders banks. Make sure the “Bank Cylinder Setup” Table is correctly initialised. The Input channel “Manifold Pressure - Bank 1” is used to control the Fueling on Bank 1. The Input channe; “Manifold Pressure - Bank 2” is used to control the Fueling on Bank 2.Hugoen-us