https://docs.emtronaustralia.com.au/engine-management/config/channels/throttle-position-input/index.htmlUsed primarily by the ECU for Transient Accel and Decel fueling. It can be used in 4D/5D mapping and also controls the lockout conditions for many ECU functions. Clamp Settings The available range is from -100.0 % to 100.0%, however after calibration the range should show 0.0%(closed throttle) to 100.0%(open throttle). NOTE: The ECU does not clamp the minimum TP to 0.0% nor the maximum to 100.0%. These settings are adjustable from the Input Setup Form.Hugoen-us