Windows 10

To setup the Ethernet on Windows 10 ready for the ECU connection use the following steps.

Image Image

  • Left Click Windows Icon - Bottom Left corner

Image Image

  • Left Click Settings Icon - 2nd from bottom on Left

Image Image

  • Left Click “Network & Internet” - Top Right

Image Image

  • Left Click “Ethernet” - 4th from Top on the Left

Image Image

  • Left Click “Change Adapter Options” - Top Right

Image Image

  • Right Click “Ethernet”

Image Image

  • Left Click “Properties”

Image Image

  • Select “Internet Protocol Version 4 (TCP/IPv4) and Left Click “Properties”

Image Image

  • Use the following IP address

Image Image

  • Left Click “OK” and exit, the process is complete
  • Done. Connect the Emtron Ethernet cable.