https://docs.emtronaustralia.com.au/engine-management/functions/gearshift/gear-shift-control3/index.htmlGearshift Control Function Setup Emtron has multiple methods of Gearshift Control Config, Function Setup, Motorsport, Gearshift Control Mechanical - Manual Shift (Force) Electronic - Paddle There are also other CAN BUS Triggered modes for Application Build versions. ** See those Application Build Manuals for details Configure Gear Position using the “Gear Detection Voltage” channel . This is normally a barrel position sensor located on the sequential gearbox. See Config View -> Inputs -> Vehicle Tab Configure the Inputs. Configure the following from the Inputs -> Motorsport tab: Paddle Shift mode Upshift Paddle Input Downshift Paddle Input Reverse Lockout Switch if required Compressor Pressure Input if required In Force Shift mode Gearshift Force InputHugoen-us