https://docs.emtronaustralia.com.au/engine-management/functions/gearshift/upshift-rev-match-enable-table/index.htmlUpshift Rev-Match Enable Table This table controls when the Rev-Match function is started. 0 = OFF 100 = ON Any other value = no change It is important the Rev-match RPM limiting starts AFTER the initial Torque Reduction Cut/Retard. This is because the Upshift Rev-Match RPM limit will be lower than the current Engine Speed and will most likely take %cut priority, preventing the initial Torque Reduction Cut/Retard from working as expected.Hugoen-us