https://docs.emtronaustralia.com.au/engine-management/functions/traction-control/index.htmlTraction Control The following calculated runtimes are generated by Emtron that are Traction Control related (to be further discussed more specifically): Traction Status – The working status of the traction control Traction Control State - The working state of the traction control Ign Traction Trim - Ignition advance compensation Traction Target - %Slip Target when Traction Control is active Traction Feedforward - % feed forward when Traction Control is active Traction Target Error – The total drive slip percentage above/below the Traction Target Traction PID – Proportional, Integral, and Derivative gains Traction Limit Request – Status of Traction Control being utilized in real-time Traction Target Table – Active traction target table Drive Slip Calculation – Percentage of slip between defined speed channels Outputshaft Slip - Percentage of slip between Outputshaft speed source and Ideal Outputshaft Ideal Speed - Outputshaft Ideal Speed as defined by look up table Traction RPM Target - Outputshaft Source calculates Engine Speed All these runtimes can be utilized within other functions of Emtron.Hugoen-us