https://docs.emtronaustralia.com.au/engine-management/tuning/fuel/starting-fuel-table-control-setup/index.htmlTable Control Setup Each starting fuel phase (Pre-Crank Fuel, Cranking Fuel, and Post-Start Fuel) includes a Table Control parameter which defines how the ECU sources fuel values during engine start. This control determines whether a single fuel table is used or whether Z-axis blending is enabled between two calibration tables. Available Options Value Mode 0 OFF 1 ON - Table 1 2 ON - Table 2 3 Not Available 4 Not Available 5 Not Available 6 ON - Z-Axis Mode Descriptions OFF (0) Disables the selected starting fuel phase. No fuel contribution is applied from this table.Hugoen-us