Addressing

0: Single (11-BIT)

1: Sequential (11-BIT)

2: Single (29-BIT)

3: Sequential 29-BIT)

__________________________________________

Addressing

Single: Only the single “CAN Address” is active

** This means data can only be TX/RX on that single CAN Base Address

Sequential:  The CAN address starts at the “CAN Address”  defined then sequentially 

increments that address until all the data has been transmitted

** Once the data (TX/RX) on the CAN Base Address is full, the ECU will poll the next address sequentially for additional data

    IE 1250, 1251, 1252, …