General Setup Information

• Analog Channels 7 -12 have configuration pull-up resistors. Sensors requiring a pull-up such as Engine Temperature or Inlet Temperature should use these channels.

• The common recommended channel assignments are:

  • Manifold Pressure = Analog Input Channel 1
  • Throttle Position = Analog Input Channel 2
  • Engine Temperature = Analog Input Channel 7
  • Inlet Temperature = Analog Input Channel 8.

Filter Settings

The following filter limits apply to ALL Channels configured from the Engine Input Setup Tab. The recommended filter settings for each channel are listed under each respective section. 

FIlter Setting Minimum = 0  (OFF)

FIlter Setting Maximum = 50