Starting Setup

Pre-Crank Injection Enable

Enables and configures a Pre Injection

Event.  This can assist with a faster

“burst” of the engine when starting

Start Position requires the “Start Position Switch” to be configured.

0: OFF

1: Start Position

2: First Crank Index Signal (x1 Event)

3: Key - ON

4: First Crank Index Signal (Multiple Events)

__________________________________________

Pre-Crank Multi Pulse Count

On Ethanol base fuels significantly more pre-crank is required to 

start the engine.  However long pre-crank pulses can cause the 

fuel to enter a liquid state, normally contaminating the spark plugs

and inhibiting good starting . 

The solution is a shorter pulse width but more pulses.

__________________________________________

Pre-Crank Multi Pulse Interval

The time between consecutive pre-crank prime pulses.

(Only applies when more than 1 pulse is used)