Launch Arming
Launch Arming
-— Launch Arming Notes —–
For the Launch System to become armed ALL the following conditions must be true. (This means all these conditions are “ANDed” together)
1) Throttle/Pedal > Launch TP/PP Arming
*** AND ***
2) Engine Speed > Arming RPM
*** AND ***
3) Clutch Switch Status = ON (when enabled)
*** AND ***
4) Clutch Position > Clutch Position Arming (when enabled)
*** AND ***
5) Speed > Arming Speed
*** AND ***
6) User Channel = ON (when enabled)
*** AND ***
7) Arming time > Arming Timer settings (s)
Launch TP/PP Arming
The Launch Control system will be ready for arming when the TPS1 or PPS1 (if assigned) is above this value.
***NOTES ***
1: All remaining Arming Conditions MUST be satisfied before the Launch Control becomes armed.
2. The “Launch TP/PP Arming” setting MUST be greater than the “Launch TP/PP Disarming” setting.
0.0% = OFF
Arming Timer
Arms Launch Control once all arming condition are meet and this time has been reached.
0 = OFF.
Arming RPM
The Launch Control system will be ready for arming when the Engine Speed is above this value.
***NOTES ***
1: All remaining Arming Conditions MUST be satisfied before the Launch Control becomes armed.
2. The “Arming RPM” setting MUST be greater than the “Disarming RPM” setting.
3, The “Arming RPM” should be below the Entry Range RPM threshold.
0 = OFF
Clutch Switch Arming
When set to ON the Clutch Switch can be used to arm the Launch Control System.
(Clutch Switch Status = ON)
***NOTES ***
1: All remaining Arming Conditions MUST be satisfied before the Launch Control becomes armed.
2: Clutch Switch Input Channel MUST be configured
0: OFF
1: ON
Clutch Position Arming
The Launch Control system will be ready for arming when the Clutch Position is above this value.
***NOTES ***
1: All remaining Arming Conditions MUST be satisfied before the Launch Control becomes armed.
2. The “Clutch Position Arming” setting MUST be greater than the “Clutch Position Disarming” setting.
3. 100.0% Position = Clutch fully depressed
0 = OFF
Arming Speed
The Launch Control system will be ready for arming when the Launch Speed Reference Channel input is below this value.
This ensures the vehicle is stationary or very close before allowing the Launch Control to arm.
***NOTES ***
1: All remaining Arming Conditions MUST be satisfied before the Launch Control becomes armed.
Arming User Channel
Create a custom Arming method from a User Function.
The Launch Control system will be ready for arming when the User Channel is ON.
***NOTES ***
1: All remaining Arming Conditions MUST be satisfied before the Launch Control becomes armed.
0: OFF
1: User Output Channel 1
2: User Output Channel 2
3: User Output Channel 3
4: User Output Channel 4
5: User Output Channel 5
6: User Output Channel 6
7: User Output Channel 7
8: User Output Channel 8
9: User Output Channel 9
10: User Output Channel 10